Design
Automation AK operates through disqualification powder gases through the upper hole in the wall of the barrel bore. Gas piston on the rod tightly linked to the slide frame. After departing the slide frame under the influence of gas pressure at the desired distance of exhaust gases go into the atmosphere through the holes in the gas tube. Locking barrel done by turning the shutter, and the two battle of the projection gate go to the respective receiver slots. Rotate the shutter is made bevel slide frame. The slide frame is the leading element of Automation: it sets the direction of movement of moving parts, takes the majority of shock loads in the longitudinal channel frame slide placed return spring (similar to the Sub-machine guns are sometimes not quite correctly called the "back-and-battle"). Handle re-located to the right, and done in concert with the slide frame. When you release the shutter moving back the slide frame comes pre-shift ("stragivanie") located in the chamber liner. This helps to discharge the pressure in the chamber and prevents breaking shells with subsequent extraction even at very high contamination of the chamber. The release liner to the right hand through the window receiver box mounted on the shutter provide spring ejector and hard reflector receiver. "Posted" position of the moving parts in the receiver with a relatively large gaps ensure reliable operation of the system with a strong contamination.